The dehumidifiers DANTHERM CDP 40T have been specifically developed for private domestic swimming pools and spas.
Description : Through a wall installation air dehumidifier 400 m³/h - CDP40T
Humid air from the swimming pool hall is drawn into the dehumidifier by its integral fan. When passing through the evaporator the air is cooled down to below dew point and water vapour is condensed into water that is drained away. The now dry air is then passed over the condenser coil where the air is heated and returned to the pool hall.
Having passed through the dehumidifier the air temperature is approximately 5°C higher than before.
The unit DANTHERM CDP40T is fully automated, near silent in operation and controlled by a built-in hygrostat. A display clearly indicates working modes. The unit is easily maintenance by removing the front panel to clean the filter.
The unit DANTHERM CDP40T is deliver with wall support.
Technical Data : Through a wall installation air dehumidifier 400 m³/h - CDP40T
General Characteristics | |
---|---|
Air flow | 400 m³/h |
Electrical supply | 230 V (Ph+N) |
Power rating | 720 W |
Current | 3,8 A |
Dehumidification at 30°C - 80% R.H. | 46 L/day |
Dehumidification at 28°C - 60% R.H. | 34 L/day |
Dehumidification at 20°C - 60% R.H. | 18 L/day |
Sound level at 1 meter | 46 dBa |
Refrigerant | R407C |
Refrigerant weight | 0,7 kg |
Dimensions and Weights : | |
Deph x high x width | 326 x 770 x 1010 mm |
Operating Limits : | |
Ambient Air Temp. | 10 - 36 °C |
Ambient Humidity | 40 - 100 % R.H. |
This unit could be install with the following accessories:
• Mobile service unit with cable 2 meters
• Remote hygrostat
• Feet for floor mounting
• Heater with hot water