The Electrode Steam Humidifier LE30P is the simplest and most effective way to humidify the air.
Description : Electrodes boiler humidifier - LE30P
Instantaneous modulation of steam by triacs for close humidity adjust
LON WORKS compatibility - Symbol of various states by LED and pictograms in frontage
Regulator build in for stand alone operation with the VAPAC sensor or with external control signal
Operate with city water - Galvanised cabinet (Stainless steel on special require) with avec S.S. bottom
Unit fitted with disposable cylinder
Build in transformer for internal operating voltage for one electrical power supply
Master/slave function for connection up to 10 cylinders (450 kg/h)
Fault and run contacts reports
Technical Data : Electrodes boiler humidifier - LE30P
General Characteristics | |
---|---|
Maximum steam output | 30 kg/h |
Electrical supply | 400 V (3Ph+N) |
Power rating | 22.5 kW |
Full load Current | 41 Amps |
Dimensions and Weights : | |
Height | 810 mm |
Width | 520 mm |
Depth | 415 mm |
Weight | 34 kg |
Steam pipe to add | 1 x Ø 55 mm |
Water and Drain Connections : | |
Water Connection | 3/4" thread BSP |
Drain Outlet | 35 mm OD spigot |
Water Supply : | |
Conductivity | 80 - 1000 µs |
Supply Pressure | 1.5 - 8 bar |
Operating Limits : | |
Ambient Air Temp. | 5 ºC to 35 ºC |
Duct Pressure | +2000 Pa , -600 Pa |
This unit could be install with the following accessories :
• Alfa numeric display build in the frontage of the unit or, de-mountable
• Mobile service unit with cable 2 meters
• Frost protect kit for use up to 1°C (FVKit 159)
• Room distribution unit for diffuse of the steam in ambiance, available for units from 5 to 30 kg/h
• Ambiance sensor for humidity control (FVKit 107), or for duct (FVKit 108)(need alpha-numeric display)
• Steam pipe standard or reverse (for condenses return into the boiler), special steam pipe MULTIVAP
• Steam and condenses hose
• Cleanable steam cylinder