Adiabatic evaporative cooler for large volumes ROOF COOLER is a simple and efficient solution for cooling industrial and storage buildings.
Description : Large volume evaporative cooler - ROOF COOLER
Adiabatic cooling or evaporative cooling, uses the physical principle of evaporation of water, which cools the environment, just like a mister.
Its operation is very simple : the hot outside air is sucked through the wet media panels, the water in these panels evaporates, absorbing energy from the air, the hot air thus becomes cool.
ROOF COOLER is fully automatic, thanks to its dedicated control unit equipped with a relative humidity and temperature sensor.
ROOF COOLER automatically manages these rinsing and drying operations (to leave the appliance without water when not in use) and to prevent legionella pollution.
- Very low energy consumption
- Simple maintenance
- Powerful and robust
The adiabatic evaporative air cooler is much more economical and environmentally friendly than conventional air conditioning. Both in terms of installation and use.
The adiabatic evaporative air cooler is a simple unit with a low susceptibility to failure. Simplified maintenance, no compulsory inspection and no leakage control of the cooling circuit as with conventional air conditioning.
Only annual maintenance is required for cleaning and winter storage.
Healthy and comfortable air
The adiabatic evaporative air cooler operates with all new air, so the stale air in the room is constantly renewed, which provides much better indoor air than with air conditioning.
This also allows the warehouse door to be left open.
While air conditioning dries out the air and creates cold draughts, causing discomfort and illness, the adiabatic evaporative air cooler maintains an ideal relative humidity and body temperature. Static electricity disappears and the ideal comfort of machines and people is achieved.
A minimal ecological footprint
- No refrigerant gas or chemicals
- Very low power consumption
- Water consumption is kept to a strict minimum, on average 20 to 25 L/h, i.e. 0.1 € per hour of operation in general.
No risk of bacterial growth
.
When an adiabatic evaporative air cooler is in operation, the water temperature is too low for bacteria to grow. When the ROOF COOLER is not in use, it drains and dries automatically to prevent proliferation.
Technical Data : Large volume evaporative cooler - ROOF COOLER
General Characteristics | |
---|---|
Power rating | 1 500 W |
Air flow | 15 000 m³/h |
Electrical supply | 400 V (3ph+N) |
Water tank capacity | 45 Litrers |
CE Approval | Yes |
Manufacturer warrantly | 2 years |
Dimensions and Weights : | |
Weight | 80 kg |
Outlet air diameter | 610 mm (ou 660 x 660 mm) |
Water and Drain Connections : | |
Water Connection | 1/2" (15/21) |
Drain Outlet | 3/8" (20/27) |
Water Supply : | |
Type | Tap water |
Ph | 6 -8 °F |
Hardness | 250 mg/l CaCO3 maxi |
Supply Pressure | 2 to 6 bars |