The resistant steam humidifier is the most efficient and economical solution for moistening the air.
Description : Resistance steam humidifier for PROCESS applications - LR10P-Mono
Constant steam flow and instantaneous modulation by triacs for humidity adjust until +/- 1% H.R.
LON WORKS compatibility - Symbol of various states by LED and pictograms in frontage
Regulator build in for stand alone operation with the VAPAC sensor or with external control signal
Operate with demineralised water, softened or city water - Galvanised cabinet (Stainless steel on special require) with avec S.S. bottom
Build in transformer for internal operating voltage for one electrical power supply
Fast maintenance without consumable thanks to the powerfull calcium drain pomp and the anti-adhesive coating in the stainless steel tank
Technical Data : Resistance steam humidifier for PROCESS applications - LR10P-Mono
General Characteristics | |
---|---|
Maximum steam output | 10 kg/h |
Electrical supply | 230 V (Ph+N) |
Power rating | 7.5 kW |
Full load Current | 19 Amps |
Dimensions and Weights : | |
Height | 810 mm |
Width | 520 mm |
Depth | 415 mm |
Service Weight | 36 kg |
Steam pipe to add | 1 x Ø 35 mm |
Water and Drain Connections : | |
Water Connection | 3/4" thread BSP |
Drain Outlet | 35 mm OD spigot |
Water Supply : | |
Conductivity | 0 - 1000 µs |
Supply Pressure | 1.5 - 8 bar |
Operating Limits : | |
Ambient Air Temp. | 5 ºC to 35 ºC |
Duct Pressure | +2000 Pa , -600 Pa |
This unit could be install with the following accessories :
• Alfa numeric display build in the frontage of the unit or, de-mountable
• Mobile service unit with cable 2 meters
• Frost protect kit for use up to 1°C (FVKit 159)
• Room distribution unit for diffuse of the steam in ambiance, available for units from 5 to 30 kg/h
• Ambiance sensor for humidity control (FVKit 107), or for duct (FVKit 108)(need alpha-numeric display)
• Steam pipe standard or reverse (for condenses return into the boiler), special steam pipe MULTIVAP
• Steam and condenses hose