The dehumidifier DANTHERM CDP 40 have been specifically developed for private domestic swimming pools and spas.
Description : Ambiance air dehumidifier - CDP 40
Humid air from the swimming pool hall is drawn into the dehumidifier DANTHERM CDP40 by its integral fan. When passing through the evaporator the air is cooled down to below dew point and water vapour is condensed into water that is drained away. The now dry air is then passed over the condenser coil where the air is heated and returned to the pool hall.
Having passed through the dehumidifier DANTHERM CDP40 the air temperature is approximately 5°C higher than before.
The unit is fully automated, near silent in operation and controlled by a built-in hygrostat. A display clearly indicates working modes. The unit is easily maintenance by removing the front panel to clean the filter.
Technical Data : Ambiance air dehumidifier - CDP 40
General Characteristics | |
---|---|
Air flow | 400 m³/h |
Electrical supply | 230 V (Ph+N) |
Power rating | 660 W |
Dehumidification at 30°C - 80% R.H. | 46 L/day |
Dehumidification at 28°C - 60% R.H. | 34 L/day |
Dehumidification at 20°C - 60% R.H. | 16 L/day |
Dehumidification at 10°C - 60% R.H. | 2.4 L/day |
Heating Power for water at 80/60°C air at 27°C | 2 kW |
Sound level at 1 meter | 46 dBa |
Refrigerant | R407C |
Dimensions and Weights : | |
Deph x high x width | 326 x 770 x 1010 mm |
Weight | 56 kg |
Operating Limits : | |
Ambient Air Temp. | 10 - 36 °C |
Ambient Humidity | 40 - 100 % R.H. |
This unit could be install with the following accessories:
• Remote hygrostat
• Feet for floor mounting
• Air heater with hot water