Ducted air dehumidifier DANTHERM
CDP135 mono

Description :  Ducted air dehumidifier - CDP135 mono

This high-end ducted dehumidifier is designed to dehumidify, heat and ventilate an indoor swimming pool or spa, as well as all other humid areas.

The CDP 85-135-175 condensing dehumidifiers are specially designed for the dehumidification of hotel swimming pools, private swimming pools and therapeutic pools. They offer a high moisture removal capacity per kWh, high durability and efficient self-regulation. They are ideal for installation in an adjacent technical room.

All metal parts and internal surfaces are powder coated before assembly and the evaporator and condenser coils are made of epoxy coated aluminium. Corrosion protection is in accordance with EN/ISO 12944-2, class C4.

The range is equipped with the Dantherm CC6 controller which features an integrated 2.4" touchscreen allowing the user to easily customize set points and view operational variables.

Moist air from the room is drawn in by the fan integrated into the dehumidifier. The air passing through the evaporator is cooled below the dew point, the water vapor is condensed in the water which is evacuated. The now dry air then passes over the condenser where it is reheated and returned to the pool hall.
After passing through the dehumidifier, the air temperature increases by approximately 5°C.

The DANTHERM dehumidifier CDP85 is fully automatic and virtually silent. A display clearly shows the operating modes. It is easy to maintain, simply open the front door to clean the air filter.

The panels of the CDP85 dehumidifiers DANTHERM can be easily moved to fit into any technical room. The control panel and inspection door can be changed to operate on different sides of the unit, depending on door openings or wall positions.

Air can be discharged from the top of the unit rather than from the side if space is limited. This well thought-out philosophy means that the dehumidifier is suitable for any type of installation, no matter how small.

The highlights of the DANTHERM CDP135:

- Constant flow EC radial fan
- User-specified low and high air volume
- R454C refrigerant with a GWP of 148
- Mobile inspection access
- Outdoor air intake (15%) possible via a duct connection
- Supply air duct connected horizontally or vertically
- Microchannel condenser
- Integrated control of the exhaust fan and/or outdoor air damper
- Regulation of heating and cooling demand
- Data logging and software update via the supplied microSD card
- Compact unit designed to fit into any technical room configuration
- Sandwich cover panels with 45 mm
- Optional water condenser
- 3 control modes specified by the set point - relative, absolute or dew point
- Modbus RTU (RS485)


DANTHERM CDP 135 is manufactured in an ISO 9001 and ISO 14001 certified factory>
The ISO 14001 standard is the international standard for environmental management, it provides guarantees in terms of controlling environmental impacts in the company.

Technical Data :  Ducted air dehumidifier - CDP135 mono

This unit could be install with the following accessories:

• Build-in water condensor for water pool heating (4 kW for 28°C water)
• Ducted hot water air heater coil
• Ducted electric air heater coil
• Anti-vibrations feet
• Wall mounting bracket

Schema :  Ducted air dehumidifier - CDP135 mono

Schema Printable View (PDF)

Video :  Ducted air dehumidifier - CDP135 mono

Documentation :  Ducted air dehumidifier - CDP135 mono

• AutoCAD file