Youtube 
LinkedIn 
Click an image to enlarge
The pool heat pump Teddington INOA is equipped with the technology Full-Inverter®. It is thus 10 times quieter and 2 times more economical than a conventional swimming pool heat pump.
Water heating up to 40°C.
Description : 4 seasons Full Inverter swimming pool and spa heat pump 5.8 kW - INOA 6
UNIQUE FULL-INVERTER ® TECHNOLOGY
The Teddington INOA 6 inverter pool heat pump is equipped with Full-Inverter® technology. It contains a variable speed compressor that adjusts its airspeed per hertz, and a fan that adjusts its fan speed turn by turn. The low speed operating philosophy of the Teddington INOA 6 inverter PAC makes customers benefit from a higher COP (efficiency) and a much lower noise level.
The Teddington INOA 6 inverter swimming pool heat pump chooses its operating speed, between 20 and 100% of its maximum power.
During the first days of the bathing season, the Teddington INOA 6 inverter heat pump runs at full capacity to heat the pool, after that, for the maintenance of water temperature, the Teddington INOA 6 inverter PAC works on average 50% of its capacity to maintain the desired temperature of the pool.
10 times quieter
Mean sound level 46 dB (A) at 1 m
When the desired pool temperature is reached, the Teddington INOA 6 inverter heat pump operates at about 50% of its capacity to maintain it at this level, the average noise level of the heat pump is then 46 dB (A) to 1 m, compared to the noise level of 56 to 60 dB (A) of a conventional On / Off heat pump, the Teddington INOA 6 inverter PAC offers you a bathing environment 10 times quieter.
2 times more energy saving
COP average of 11 to 50% of power, and max 15 of low power
When the desired pool temperature is reached, the Teddington INOA 6 inverter heat pump operates at about 50% of its capacity to maintain it at this level, the average COP (efficiency) of the Teddington INOA 6 inverter PAC is 11, while the COP of a conventional On / Off heat pump is about 5, the energy saving achieved is considerable.
- Progressive Start Technology:
The Soft Start soft start technology is designed to draw a slow load curve from shutdown to rated current over a period of 2 minutes, to avoid overloading the power grid and risking trip disruption. .
While the On / Off heat pump will create a starting current 5 times higher than the rated current, which overloads the power grid and generates voltage drops.
- Mitsubishi Inverter Dual Continuous Inverter Compressor:
Based on the innovative "double mechanism" solution, two motors work together to balance the torque and reduce vibrations. This leads to efficiency and quieter operation.
- Brushless DC Fan Motor:
Less noise and less energy consumption.
UNIQUE FULL-INVERTER ® TECHNOLOGY
- 4 seasons heat pump with immediate defrost cycle reversal.
Exclusive Full Inverter Technology:
- Compressor low energy consumption with variable power.
- Low energy consumption fan with variable flow.
- LED display and low power electronics.
Efficiency (COP) of 11 at mid-power and up to 15 at temperature maintenance in summer.
Sound level of 46 dBa at 1 meter and up to 38 dBa at 1 meter maintains temperature in summer.
- Real time display of water temperature and operating power via a clear and user-friendly control panel.
- Soft start: no current draw that causes voltage drop and disjunction
- Fully automatic operation, immediate commissioning by the user.
- Two modes of operation: SMART or SILENCE
- Housing in high quality UV resistant black ABS and stainless steel screws.
- High performance heat exchanger in pure titanium and PVC, compatible with salt electrolysis.
- Thermostatic expansion valve for optimal performance in all situations.
- Automatic protection against water shortage by integrated water flow controller.
- Setting the water heating temperature up to 40°C.
- Fast electrical connection and without opening the heat pump via the external connection box
- Simple and fast hydraulic connection thanks to the unions DN50 supplied .
- Supplied with 4 Vibration damping pads .
- Comes with a condensate drain pipe .
- High performance refrigerant without CFC R32.
- Operation in single phase 230 V.
Technical Data : 4 seasons Full Inverter swimming pool and spa heat pump 5.8 kW - INOA 6
| Performances for a spa air at 15°C/70% R.H. and water at 38°C | |
|---|---|
| Heating power | 3.2 kW |
| Performances for pool air at 26°C/80% R.H. and water at 26°C | |
| Heating power | 8 kW |
| COP at 20 % capacity | 14.1 |
| COP at 50 % capacity | 10.3 |
| COP at 100 % capacity | 7.0 |
| Performances for air at 15°C/70% R.H. and water at 26°C | |
| Heating power | 5.8 kW |
| COP at 20 % capacity | 7 |
| COP at 50 % capacity | 6.3 |
| COP at 100 % capacity | 4.8 |
| Cooling capacity | |
| Air at 35°C/40% R.H., water at 26°C | 4kW |
| Sounds Levels | |
| Sound level at 1 meter | 38.8 to 48.2 dBa |
| Sound level at 10 meters | 18.8 to 28,2 dBa |
| Electrical spécification | |
| Power supply | 230 V (Ph+N) + T |
| Electrical power | 0.17 to 1.2 kW |
| Nominal amperage | 0.7 to 5.2 A |
| Maximum amperage | 8 A |
| Needed protection | 10 A courbe C |
| Advised power cord | 3 x 1.5 mm² |
| General Characteristics | |
| Working heating range Outside température | -7 to 43°C |
| Working range Outside température | 18 to 40°C |
| Compressor type | Mitshubishi Inverter twin rotary |
| Frigorigen fluid | R32 (0.65 kg) |
| Max air flow | 2 800 m³/h |
| Advised water flow | 2 to 4 m³/h |
| Inlet and Outlet water connexions | 50 mm |
| Heat exchanger | Pur titane agreed with salt elecrolytic water treatment |
| Internal structure | Galvanised Steel frame |
| Cabinet | ABS cabinet UV resistant stainless steel screws |
| Color | Black |
| Weight and dimensions | |
| Lenght | 961 mm |
| Width | 340 mm |
| Hight | 658 mm |
| Weight | 45 kg |
| Norms and certificats | |
| CE | Yes |
| RoHS | Yes |
| Warranty | |
| Heat Pomp | 3 years |
| Titanium heat exchanger | 7 years |
| Compressor | 7 years |
Selection : 4 seasons Full Inverter swimming pool and spa heat pump 5.8 kW - INOA 6
The information contained in this Selection tab is provided for informational purposes only, and should not be construed as legal advice on any subject matter.
| Max water volume for outside pool | |
|---|---|
| Oceanic and meridional climate | 50 m³ |
| Tempered climat | 40 m³ |
| Continental and lower altitude | 30 m³ |
| Max water volume for inside pool | |
| Oceanic and meridional climate | 25 m³ |
| Tempered climat | 20 m³ |
| Continental and lower altitude | 15 m³ |
| Max water volume for spa | |
| Oceanic and meridional climate | 2 m³ |
| Tempered climat | 1,5 m³ |
| Continental and lower altitude | 1 m³ |
Schema : 4 seasons Full Inverter swimming pool and spa heat pump 5.8 kW - INOA 6
Click the image to enlarge
Video : 4 seasons Full Inverter swimming pool and spa heat pump 5.8 kW - INOA 6
Documentation : 4 seasons Full Inverter swimming pool and spa heat pump 5.8 kW - INOA 6
|
INOA 8 |
4 seasons Full Inverter swimming pool and spa heat pump 8 kW Reversible : heating and colling of the water Elegant, powerful, thrifty and ultraquiet |
|
|
|---|
|
|
INOA 12 |
4 seasons Full Inverter swimming pool and spa heat pump 11.4 kW Reversible : heating and colling of the water Elegant, powerful, thrifty and ultraquiet |
|
|
|---|
|
|
INOA 14 |
4 seasons Full Inverter swimming pool and spa heat pump 14.3 kW Reversible : heating and colling of the water Elegant, powerful, thrifty and ultraquiet |
|
|
|---|
|
|
INOA 18M |
4 seasons Full Inverter swimming pool and spa heat pump 18 kW Reversible : heating and colling of the water Elegant, powerful, thrifty and ultraquiet |
|
|
|---|
|
|
INOA 18T |
4 seasons Full Inverter swimming pool and spa heat pump 18 kW Reversible : heating and colling of the water Elegant, powerful, thrifty and ultraquiet |
|
|
|---|
