Youtube 
LinkedIn 
Click the image to enlarge
TEDDINGTON C30-CF adsorption dryer for negative cold chambers come from an innovative and stylish range of versatile equipment.
Description : Double way adsorption dryer for negative room - C30-CF-300
The adsorption dryer controls the relating humidity of the not heated places such cold rooms or stores of stocking of wood, iron, cardboard, textile industry, kernels, sugar …for industry, museums or defence for instance. The dryer also abolishes condensation in the cold surface of pipes, reservoirs, pumps, hoods of protection, building and electrical and electronic installations. . It protects the works of arts, the post offices of piloting (military installations, power stations, dockyard, planes, boats, satellites, etc).
And of course the dryer allows to adjust hygrometry during production and manufacture of hygroscopic products in pharmaceutical industry and in food industry between others.
Air process (air to be treated) crosses the wheel in permanent rotation; this one keeps the humidity contained in air. A flux of air heated by electrical resistance, says air of regeneration, is injected into the wheel in compared sense. This hot air evaporates the water contained in the wheel then is evacuated of the apparatus towards the outside. Each of both fluxes has his own fan.
The wheel is fabricated from 80 % minimum of Silicate, which is supported by a chemical resolution without solvent based on glass fibbers. In stage of regeneration, the temperature of the wheel is about 120-140°C.
Technical Data : Double way adsorption dryer for negative room - C30-CF-300
| General Characteristics | |
|---|---|
| Manufacturer warrantly | 2 years |
| Power rating | 2.2 kW |
| Electrical supply | 230 V (Ph+N) |
| Frequency | 50 Hz |
| Metal work | INOX |
| Control | on / off |
| Capacity at -25°C - 90% R.H. | 0.15 kg/h |
| Capacity at -18°C - 90% R.H. | 0.3 kg/h |
| Ambiance Heating Power | 40% of power supply |
| CE Approval | Yes |
| Dimensions and Weights : | |
| Height | 771 mm |
| Width | 554 mm |
| Depth | 398 mm |
| Weight | 53 kg |
| Process air (air to be treated) : | |
| Air flow | 300 m³/h |
| Pressure | 200 Pa |
| Air filter | oui |
| Inlet | Diam. 200 mm |
| Outlet | Diam. 200 mm |
| Regeneration air : | |
| Air flow | 50 m³/h |
| Pressure | 150 Pa |
| Inlet conditions | 0 to 35°C, 0 to 100% RH |
| Air filter | oui |
| Inlet | Diam. 100 mm |
| Outlet | Diam. 100 mm |
Selection : Double way adsorption dryer for negative room - C30-CF-300
The information contained in this Selection tab is provided for informational purposes only, and should not be construed as legal advice on any subject matter.
| Selection for cold room with refrigerate sas | |
|---|---|
| Surrounding room temperaure | 0 to 5 °C |
| Surrounding room absolute humidity | 1 to 5 g/kg |
| Frequency opening door | < 5 min/hour |
Schema : Double way adsorption dryer for negative room - C30-CF-300
Click the image to enlarge
The air process (air to be treated) passes through the wheel in permanent rotation, which retains the moisture contained in the air. A flow of air heated by electrical resistors, called regeneration air, is injected into the wheel in the opposite direction. This hot air evaporates the water contained in the wheel and is then evacuated from the apparatus to the outside. Each of the two streams has its own fan.
The wheel is made from a minimum of 80% Silicagel, which is held by a solvent-free chemical solution based on fiberglass. In regeneration phase, the temperature of the wheel is about 120-140 ° C.
Video : Double way adsorption dryer for negative room - C30-CF-300
