Using the TEDDINGTON high-pressure pump, water at 80 bars is sprayed in a micro fog. The evaporation of this mist allows an immediate cooling of the air.
The temperature then drops to 10 ° C.
Description : Condensing unit outside cooling system - KIT PREMIUM
The TEDDINGTON PREMIUM misting kit is designed to mist air condensers.
Designed to lower the temperature by up to 10°C, the TEDDINGTON Condenser and Refrigeration Unit Fogging System instantly lowers the unit's High Pressure or heat transfer fluid temperature, even during the hottest hours of the summer.
Check out the article: how to mist an air-condenser?
HIGH QUALITY PROFESSIONAL MATERIAL, the misting kit includes:
A high pressure misting unit(80 bar) in a boxed body, including:
- High pressure manometer
- Water supply solenoid valve
- Pressure regulator
- 4 anti-vibration feet
- Electric cable with 230V plug
- Water inlet and outlet quick couplings
Brumming and draining:
- Misting nozzles with drip stop
- Drainage discharge nozzle
Line accessories:
- Black Nylon High Pressure Hose Column Ø 3/8"
- 3/8" Quick Connect Nozzle Holder
- 3/8" quick connect elbow
- Isophonic clamp
- End-of-line plug
- Pipe cutter
Hydraulic accessories:
- 1 metre water supply hose - 3/4" (20/27) - F/F
- Water filter, filter holder and 5µm filter cartridge
- 1 metre filter holder to power station connection hose - 1/2"
The regulation is carried out in all-or-nothing on the electrical supply of the fogging unit, either via a thermostat or a pressure switch. The regulation can also be manual.
Installation of the system
Outdoor installation possible
Designed and manufactured in Italy
Internal electrical protection: IP65
.
Overall protection: IP x5
The installation must be drained in winter.
The misting kit for air-condenser is sized according to the surface of the heat exchanger:
3 to 5 m²: 10 nozzle kit
5 to 8 m²: 15 nozzle kit
5 to 8 m² : kit 15 nozzles
8 to 12 m² : kit 25 nozzles
25 to 40 m² : kit 75 nozzles
Caution: each misting kit must be implemented with a minimum number of nozzles, in order not to overheat:
5 nozzle kit: 4
10 nozzle kit: 8
15 nozzle kit: 15
25 nozzle kit: 15
40 nozzle kit: 30
50 nozzle kit: 40
75 nozzle kit: 50
IMPORTANT:
The foggers on air condensers do not fall under the declaration regime under heading no. 2921 of the nomenclature of classified installations for the protection of the environment.
Since January 2018, foggers for establishments receiving the public have been subject to a regulatory framework:
In order to help you with your installation, the Ministry of Solidarity and Health, in partnership with Teddington-France, has published a guide to good practice.
Download the good practice guide with this link
This guide only concerns water misting systems installed within a space open to the public.
Technical Data : Condensing unit outside cooling system - KIT PREMIUM
Kit content : | |
---|---|
A - High pressure kit | 1 |
B - Nozzle with no drop system | 10 |
C - Nozzle support | 9 |
D - Nozzle support end line | 1 |
E - 90° connexion piece | 1 |
F - Fixation system with noise atenuator | 20 |
H - Nylon tube | 15 meters |
I -Supply hose | 1 |
J - Feed water hose | 1 |
K - Drain hose | 1 |
L - Filter and support frame | 1 |
N - Cutting tool | 1 |
This professional kit includes:
A misting pump high pressure (80 bars) in cabinet
Included: Videos
- Pressure manifold
- Programmed digital display
.
- Protection cabinet
.
- Drain valve
.
- Feed water valve
.
- Pressure regulator
.
And all mounting accessories and fixing necessary.
European manufacturing high quality made