Crossflow Blower  - VT60-180A

Description :  Crossflow Blower - VT60-180A

The cross-flow blowers serial VT provide low velocity and quiet air stream with moderate pressure.
They are widely used in all refrigeration equipments.
The standard electric insulation is Class F (on request you can also have Class H accordingly to volume).
The standard range has 60 mm diameter fan impeller, but on request (volume) you can also have 45 mm fan impeller range for a room saving blower, or 65 mm, 80 mm diameter fan impeller range when you look for extra quiet operation.
Standard operation in horizontal position.
An ample lubricating oil reservoir on sleeve bearings ensures long operating life.
Special versions for very dusty or very wet areas are available on volume request.
The VT serial bears the CE mark and are manufactured according to EN 60335-1 and RoHS requirements (UL/CSA recognition and/or VDE conformity certification are also available upon volume request).

The VT serial is equipped with,
• pole single-phase shaded-pole motor 230V – 50 Hz
• fan impeller blanked from aluminium sheet
• galvanized sheet metal bower housing
• Supply connection by Faston

Technical Data :  Crossflow Blower - VT60-180A

General Characteristics
Power Supply230 V - 50/60Hz
Supply ConnectionsFaston 6.3 x 0.8 mm
Working Temperature-10° to +60°C
Wheel Blower number1
Fan impeller fixationLubrificating oil
on sleeve bearings
Motor positionleft
Rotation speed1120 rpm
Outlet flow rate100 m³/h
Motor Power24 W
Pressure max.40 Pa
Weight0.80 Kg
Ø Wheel60 mm
Wheel length180 mm
Air outlet size182 mm


Heating unit
- Provision for fastening to air outlet
- Power 2 x 1000W – 230V
- Safety automatic reset thermal cut-off
- Other power on request (500 pcs minimum)

Schema :  Crossflow Blower - VT60-180A

Click the image to enlarge
Schema - VT60-180A

Schema Printable View (PDF)