Crossflow Blower  - VT 18 F3D

Description :  Crossflow Blower - VT 18 F3D

NOISELESS, BALANCED FOR CONTINUOUS DUTY
The cross-flow blowers serial VT provide low velocity and quiet air stream with moderate pressure.
They are widely used in all refrigeration equipments.
The standard electric insulation is Class F (on request you can also have Class H accordingly to volume).
The standard range has 60 mm diameter fan impeller, but on request (volume) you can also have 45 mm fan impeller range for a room saving blower, or 65 mm, 80 mm diameter fan impeller range when you look for extra quiet operation.
Standard operation in horizontal position.
An ample lubricating oil reservoir on sleeve bearings ensures long operating life.
Special versions for very dusty or very wet areas are available on volume request.
The VT serial bears the CE mark and are manufactured according to EN 60335-1 and RoHS requirements (UL/CSA recognition and/or VDE conformity certification are also available upon volume request).

The VT serial is equipped with,
• pole single-phase shaded-pole motor 230V – 50 Hz
• fan impeller blanked from aluminium sheet
• galvanized sheet metal bower housing

Technical Data :  Crossflow Blower - VT 18 F3D

General Characteristics
Power Supply230 V - 50/60Hz
Supply ConnectionsCable 3 wires (1.20 m)
Working Temperature-10° to +60°C
Wheel Blower number1
Fan impeller fixationLubrificating oil
on sleeve bearings
Motor positionright
Rotation speed1500 rpm
Outlet flow rate140 m³/h
Motor Power28 W
Pressure max.60 Pa
Weight1 Kg
Dimensions
Ø Wheel60 mm
Wheel length180 mm
Air outlet size182 mm

Schema :  Crossflow Blower - VT 18 F3D

Click the image to enlarge
Schema - VT 18 F3D

Schema Printable View (PDF)