Description : Crossflow Blower - VT60-270x2
NOISELESS, BALANCED FOR CONTINUOUS DUTY
The cross-flow blowers serial VT provide low velocity and quiet air stream with moderate pressure.
They are widely used in all refrigeration equipments.
The standard electric insulation is Class F (on request you can also have Class H accordingly to volume).
The standard range has 60 mm diameter fan impeller, but on request (volume) you can also have 45 mm fan impeller range for a room saving blower, or 65 mm, 80 mm diameter fan impeller range when you look for extra quiet operation.
Standard operation in horizontal position.
An ample lubricating oil reservoir on sleeve bearings ensures long operating life.
Special versions for very dusty or very wet areas are available on volume request.
The VT serial bears the CE mark and are manufactured according to EN 60335-1 and RoHS requirements (UL/CSA recognition and/or VDE conformity certification are also available upon volume request).
The VT serial is equipped with,
• pole single-phase shaded-pole motor 230V – 50 Hz
• fan impeller blanked from aluminium sheet
• galvanized sheet metal bower housing
• Supply connection by Faston
Technical Data : Crossflow Blower - VT60-270x2
|Power Supply||230 V - 50/60Hz|
|Supply Connections||Faston 6.3 x 0.8 mm|
|Working Temperature||-10° to +60°C|
|Wheel Blower number||2|
|Rotation speed||1000 rpm|
|Outlet flow rate||300 m³/h|
|Motor Power||40 W|
|Pressure max.||46 Pa|
|Ø Wheel||60 mm|
|Wheel length||2x270 mm|
|Air outlet size||2x272 mm|
- Provision for fastening to air outlet
- Power 2 x 1000W – 230V
- Safety automatic reset thermal cut-off
- Other power on request (500 pcs minimum)