The Electrode Steam Humidifier is LE110 the simplest and most effective way to humidify the air.
Description : Electrodes boiler humidifier - LE110
Progressive modulation of steam by water level
LON WORKS compatibility - Symbol of various states by LED and pictograms in frontage
Regulator build in for stand alone operation with the VAPAC sensor or with external control signal
Operate with city water - Galvanised cabinet (Stainless steel on special require) with avec S.S. bottom
Unit fitted with disposable cylinder
Build in transformer for internal operating voltage for one electrical power supply
Master/slave function for connection up to 10 cylinders (450 kg/h)
Fault and run contacts reports
Technical Data : Electrodes boiler humidifier - LE110
| General Characteristics | |
|---|---|
| Maximum steam output | 110 kg/h |
| Electrical supply | 2 x 400 V (3Ph) |
| Power rating | 2 x 42 kW |
| Full load Current | 2 x 65 Amps |
| Dimensions and Weights : | |
| Height | 810 mm |
| Width | 990 mm |
| Depth | 415 mm |
| Weight | 52 kg |
| Steam pipe to add | 2 x Ø 55 mm |
| Water and Drain Connections : | |
| Water Connection | 3/4" thread BSP |
| Drain Outlet | 35 mm OD spigot |
| Water Supply : | |
| Conductivity | 200 - 1000 µs/cm |
| Supply Pressure | 1.5 - 8 bar |
| Operating Limits : | |
| Ambient Air Temp. | 5 ºC to 35 ºC |
| Duct Pressure | +2000 Pa , -600 Pa |
This unit could be install with the following accessories :
• Alfa numeric display build in the frontage of the unit or, de-mountable
• Mobile service unit with cable 2 meters
• Frost protect kit for use up to 1°C (FVKit 159)
• Room distribution unit for diffuse of the steam in ambiance, available for units from 5 to 30 kg/h
• Ambiance sensor for humidity control (FVKit 107), or for duct (FVKit 108)(need alpha-numeric display)
• Steam pipe standard or reverse (for condenses return into the boiler), special steam pipe MULTIVAP
• Steam and condenses hose
• Cleanable steam cylinder
Youtube
LinkedIn 
