The SKE4-20 M electric humidifier generates pure, sterile and odorless water vapor.
Quick maintenance without tools, and warranty without consumables.
It is designed to maintain a very precise level of relative humidity for
industrial and commercial applications, such as industrial processes, hospitals, laboratories, museums or offices.
Description : Steam humidifier - SKE4-20 M
Maintenance:
• Stainless steel vaporization chamber can be
removed in less than 20 seconds without tools (the others
components, such as heaters and hose
steam remain fixed)
• Heat-deformable and self-cleaning heating elements
for quick and easy maintenance
• Ergonomic design with rail-guided system that
facilitates and speeds up the maintenance of the spray chamber
• Ecological: no plastic cylinder to replace
• Intelligent water level detection system
combining three different technologies (patent pending)
• Electrical compartments of power, control and
hydraulics, simplifying access to components
• Storage of the integrated access panels to the chassis,
allowing maintenance without clutter
Performance and Security:
• Steam capacities from 5 to 120 kg / h
• AFEC® foam detection technology ensures
safe and effective operation
• Independent programmable times for a mode
customized operation and emptying
• All-silicone tubing to accept
any type of water (city water, osmosis or deionized)
• Manual drain valve for draining
the device during a power failure for use
more secure
• Cooling system of drained water (water does not
does not exceed 60ºC)
• Built-in disconnect switch for increased safety during
maintenance and reduced installation cost
Communications:
• GTC integration with the communication interface
BACnet MS / TP or Modbus
• Optional Ethernet module for BACnet IP or Modbus
IP, Email Communications, and Web Services
• Optional Wifi key
• Firmware update by SD card, USB or BACnet
SKE4 electric humidifier
Spray chamber - Spray the water, not the money!
The SKE4-20 M electric humidifier is equipped with a chamber
of vaporization minimizing the time and costs of
maintenance of the device while remaining ecological.
Easy maintenance:
Permanent vaporization chamber, light and steel
stainless steel requiring no replacement
Guided rail system for easy maintenance
Self-supporting tank for easy maintenance
No tools required
This represents time savings of up to 70%
when compared to other maintenance procedures
similar products offered in the industry.
Disassembly of the spray chamber is done in 3 steps:
1. Disconnect the water supply
2. Unclip the two hooks
3. Slide tank with rail guided system
No tools required, resistors and hose
steam remain attached to the device.
Water Level Detection System (Patent Pending):
To ensure superior reliability and safety
maximum, the SKE4-20 M has a system of detections of
intelligent water level:
Automatic recalibration over the entire life of
humidifier
Redundancy guaranteeing a secure operation and
uninterrupted even in case of malfunction
Self-cleaning system avoids accumulation of deposits
Two-level thermal protection inside and out
the outside of the spray chamber (stops
the humidifier in case of high temperatures)
Send local or remote notification by email to
the operator in case of a problem
AFEC® Foam Level Detection System:
The AFEC® system offers security and control
effective energy of boiling water and steam.
The AFEC® system consists of:
• Measuring probe of the body of water
• Anti-foam detection probe
• Water temperature sensor
The AFEC® system is unique in that
water level sensor can not be triggered
unnecessarily by the foam formed on the surface of the water
boiling. This eliminates the possibility of damaging
heating elements and optimizes the emptying cycles for
save energy.
Communication:
The SKE4-20 M offers several communication features
allowing better management of its maintenance, its
operation and energy consumption:
• Independent time programmer for operation
of the device and the drain cycle, configurable via the
menu or the BACnet communication interface
Optional Features :
• Selectable BACnet MS / TP or Modbus Menus
allowing access to more than 75 objects / registers for
BMS and IoT integration (Internet of Things)
• Ethernet module
- BACnet IP or Modbus IP
- Web services to perform configuration
of humidifiers, remote diagnostics and well
other functions from any location
• Wi-Fi communication
Smart controller:
The SKE4-20 M controller is configured specifically for your
SKE4 steam humidifier
• User-friendly interface consisting of a 128 x 64 LCD screen,
menu-driven with 8 function buttons for a
configuration and faster operation
• User access rights management system that
allows the menu to display only available functions
for the type of connected operator: end user,
service technician, installer or integrator
• Quick setup menu that allows installation
faster and easier by displaying only
most used functions and configurations
• firmware with on-site upgrade via SD card,
USB or BACnet
• Simplified visualization and export of the log of
logs and alarm log
Options
Steam diffusion system:
To diffuse in a ventilation duct, the humidifier
SKE4 requires a water vapor diffusion system
Multi-steam or steam ramp.
Ventilation box installation option
SDU is ideal for dispensing steam directly into
a room without ductwork or for a localized area.
X-Stream ™ Technology:
• Insulated steam diffuser (ramps and collector) at high
efficiency with vapor diffusion nozzles (patent pending
pending)
• Ramps and manifold built in 304 stainless steel to
double wall with foam insulation Armacell UT / Solaflex
Encapsulated ™
• Special silicone vapor diffusion nozzles
designed to eliminate any condensate ejection at
starting or modulating the production of
steam
• Energy loss reduced to 85%. Losses including
steam consumption and condensate generated during the
heat transfer
• More details, see documentation on X-Stream ™
External installation box:
Robust design for all climates
• LCD screen accessible through a window so no need
to open the door.
• Fully insulated and constructed from heavy duty steel
• The outer and inner surfaces are protected with
a zinc primer and a polyurethane powder coating
for better resistance against scratches and
corrosion.
• Protection against frost or overheating
• Designed to be installed on a roof base, but can
also be installed on a stand
• Connections can be made on the side or by the
bottom of the device, thus allowing total flexibility for
all configurations
Humidisoft:
Web application for design and system selection
Humidification
• Ready to select your SKE4-20 M humidifier
• Neptronic has developed a Web application that allows
save time when selecting humidifiers
commercial, industrial or residential.
Features:
• Calculation of automatic humidification load
• Web application (online)
• Report Builder
• Display of the absorption distance
• Selection of steam diffuser
• Humidifier Options
• Project Management
Easy to use:
Once registered for an online account, you can
start creating projects and create your own humidifier
with all the options available and with ease.
Technical Data : Steam humidifier - SKE4-20 M
General Characteristics | |
---|---|
Heater element | Heaters |
Power | 15 kW |
Steam output | 20 kg/h |
Electrical supply | 3 x 400 V (3 Ph) |
Full load Current | 22 A |
Dimensions and Weights : | |
Height | 813 mm |
Width | 565 mm |
Depth | 384 mm |
Service Weight | 66 kg |
Weight | 45 kg |
Water and Drain Connections : | |
Water Connection | 1/2" |
Drain Outlet | 1 x DN15 + 1 x DN20 |
Drain Outlet température | 60° max. |
Steam outlet | 1 x DN 35 mm |
Water Supply : | |
Type | Tout |